Capacity: 120-130 TPH
Input Moisture: ≤15%
Output Moisture: ≤0.5%
On-site overview：1000TPD Cement Vertical Mill in Sichuan
Configuration is to perform the best layout scheme according to the site investigation and client's specific requirements. Since the customer put into production, the equipment has been running steadily, and the maintenance is easy and simple.
Introduction of the site
The cement vertical mill production line developed by Yusheng has the advantages of large production capacity, high degree of automation, high product quality, low energy consumption, low harmful emissions and large utilization of industrial waste, so it is an ideal choice for cement production enterprises.
1. Unit Power Consumption.
When the specific surface area is 330 m2/kg, the energy consumption is only 24-27 kwh/t, which is much lower than that of the ball mill.
2. Water Demand.
After repeated tests, the water demand is equal to that of ball milling products, which can be controlled at 26-28%.
3. Particle Size Matching.
By adjusting the operating parameters, the particle matching of cement can be adjusted in a wide range, and it is easy to adjust, and the variety of cement can be easily adjusted according to the needs of the market.
4. Cement Strength.
Working performance of the cement product is excellent, the grain shape is equivalent to that of ball milling, the cement strength (3D, 7d, 28d strength) is equal to or even slightly higher than that of ball milling, the water requirement can be controlled at 26-28%, and the matching of cement particles is easy to adjust.
5. Grain Shape.
Through the comparative analysis of particle shape similarity under electron microscope, the grain shape of YSMK clinker vertical mill production line is basically the same as that of ball mill.